4" X 4" Smooth Black Poly Wobble Roller. 20mm ID.

Keel rollers carry approx 60% of the weight and side rollers carry 40% of the weight.

The selection of 3" or 4" wobbles is really a matter of hull strength and bracket configuration.

4" X 4" Smooth Black Poly Wobble Roller. 26mm ID.

Keel rollers carry approx 60% of the weight and side rollers carry 40% of the weight.

The selection of 3" or 4" wobbles is really a matter of hull strength and bracket configuration.

3 inch Rubber Keel Roller. 17mm ID. Suits 5/8 inch spindle.

A common roller used on small tinnies along the keel and sometimes used as a bow stop.

4" Rubber Keel Roller. 17mm Bore. Suits 5/8" Spindle.

Popular keel rolller for small to medium sized boats.

4.5" Rubber Keel Roller. 17mm Bore. Suits 5/8" Spindle.

Popular keel rolller for small to medium sized boats.

6" Rubber Keel Roller. 17mm ID. Suits 5/8" Spindle.

Strong roller with a reinforced bore. High sided roller to prevent the boat falling off the roller at the boat ramp.

Suitable for small to medium sized boats.

6" Rubber Sydney Roller. 17mm ID. Suits 5/8" Spindle. Strong roller with a reinforced bore.

High sided roller to prevent the boat falling off the roller at the boat ramp.

Suitable for small to medium sized boats.

8" Rubber Keel Roller. 17mm ID.

Suits 5/8"mm Spindle. Reinforced ID

Suits larger boats that have a broader keel.

8" Rubber Curved Roller. 20mm ID. Suits 3/4" Spindle.

12" Curved Black Roller. 1" ID. Suits 22mm Spindle.

310mm Long x 82mm Wide suits all our 12" brackets.

4.5" Rubber Bilge Roller. 17mm ID. Suits 5/8" spindle.

Flat or Bilge rollers as they are called in some States, go down on the transom of some boats where a flat bottom demands this type of roller.

Certainly not for deep Vee'd boats unless they are part of a spring loaded Retriever Mate type self centering system.

6" Rubber Bilge Roller. 17mm ID. Suits 5/8" spindle.

Flat or Bilge rollers as they are called in some States, go down on the transom of some boats where a flat bottom demands this type of roller.

Certainly not for deep Vee'd boats unless they are part of a spring loaded Retriever Mate type self centering system.

8" Rubber Bilge Roller. 21mm ID. Suits 20mm spindle.

Flat or Bilge rollers as they are called in some States, go down on the transom of some boats where a flat bottom demands this type of roller.

Certainly not for deep Vee'd boats unless they are part of a spring loaded Retriever Mate type self centering system. Sometimes used as a Bow Stop on Power Cats twin hulled boats.

12" Rubber Bilge or Flat Roller. 25mm ID. Suits 22mm spindle.

Flat or Bilge rollers as they are called in some States, go down on the transom of some boats where a flat bottom demands this type of roller.

Certainly not for deep Vee'd boats unless they are part of a spring loaded Retriever Mate type self centering system. Sometimes used as a Bow Stop on Power Cats twin hulled boats.

6" Self Centering Roller. 17mm ID. Suits 5/8" Spindle.

It is a myth to put self centering rollers down near the transom. Self centering rollers are best located up front near the bow stop.

They center the boat before engaging into the bow stop.

8" Self Centering Roller. 17mm ID. Suits 5/8" Spindle.

It is a myth to put self centering rollers down near the transom.

Self centering rollers are best located up front near the bow stop.

They center the boat before engaging into the bow stop.

8" Self Centering Roller. 20mm ID. Suits 3/4" Spindle.

It is a myth to put self centering rollers down near the transom.

Self centering rollers are best located up front near the bow stop.

They center the boat before engaging into the bow stop.

6" Deep V Boat Roller. Ideal for transom.

Suits 17mm Spindle.

6" Jumbo Roller 17mm ID.

120mm Diameter. 70mm across the middle section. 

7" Stepped Boat Roller. Ideal for transom. Suits 17mm Spindle. 

120mm Diameter. 70mm across the middle section.

Stepped rollers are a fantastic centering keel roller and are popular in West Australia.

4" Rubber Bow Stop. 5/8" ID. Base 100mm

4.5" LARGE Rubber Bow Stop / V Block. 13mm ID. Suits 112mm base.

Round roller cap to suit most rollers. 17mm ID

End cap to suit most rollers. 17mm ID